Ir a contenido
Meike Mount Adapter ETZ for Sony E Mount Lenses to Nikon Z Cameras

Meike Mount Adapter ETZ for Sony E Mount Lenses to Nikon Z Cameras

$159.99 - $159.99
$159.99
$159.99 - $159.99
$159.99

Feature:

Maximum diameter and length:
Packing size: 72*28*87mm
Φ65.2 X 2mm
Net weight: 44.2g (0.097lb)
Adapter front end: E-Mount camera lens
Adapter rear end: Nikon Z-mount camera
Auto Focus：Support
Auto aperture：Support
Support IS image stabilization system
EXIF Signal Transmission

E to Z mount adapter manual :

The E to Z mount adapter is designed with a special protocol for the combined application of E-mount lenses and Nikon Z-mount cameras:

  1. An adapter for most automatic E-mount lenses and manual E-mount lenses without contacts from Sony original and auxiliary factory.
  1. Most of the options in Menu are available, such as vibration reduction, AF-S\AF-C\MF focus mode,auto synchronized aperture, and AF-F full time autofocus for video shooting.
  1. In environments where it is difficult to focus, such as low light levels, it is recommended to switch the focus to center single point AFor center focus area AF.
  1. When shooting video and taking pictures of people and animals, it is recommended to turn on face and eye recognition in Menu and use auto area AFfor a better experience.

Customer Reviews

Based on 8 reviews
75%
(6)
25%
(2)
0%
(0)
0%
(0)
0%
(0)
K
Kim SG
New FW V1.9

Hi,
When I first got this adapter two days ago, it worked well on my Sony lenses and Sigma lenses but it didn't work on Samyang's and Tokina's lens.
I found today the new FW Version 1.9 which was released on 3 Aug and downloaded and upgraded the FW from the old one(V1.3?) to V1.9.
After upgrading, this adapter doesn't work on any brand lenses. I can't find the old versions of FW on this site.
What are the problems with V1.9?
Why no old versions of FW?
Is there any possibility that the adapter was damaged during upgrading?
Let me have your comments asap!

Thanks

G
Guy Booth
ETZ Review

I am using it with the Sigma e mount 100-400 mm F5-6.3 Contemporary DG DN OS on a Nikon Z 6II. All the functions appear to be working.
I like how thin it is.
The fit between the adaptor and the camera is tight. It is difficult to put the adaptor on the camera without the lens attached, but with the lens attached it is fine, so I am not complaining about that.
My concern is that there is definite movement between the adaptor and the lens. I can "rock" the lens and feel it move. It felt tight enough when I mounted the lens, but apparently it is not as tight as it should be. I don't know if it is affecting the focus.
I am unsure as to whether I should return it.

T
Theo Roelofsen
ETZ assessment

I tried it with a few lenses and it worked well eg Sigma 85mm f1.4 DG DN Art, Sigma 105mm Macro DG DN Art, Sony 14mm f1.8, Sony 24-240mm zoom. It worked intermittently with a Zeiss (Sony) 24-70 zoom - sometimes it would not focus until after several tries and sometimes it would not focus at all.
I would like to make a comment about your website - it STINKS -- its AWFUL. Very difficult to find things, no manuals and very few instructions.

M
Matthias Wolf

Mit dem Tamron 150-500 arbeitet der Adapter (Firmware 1.60) an einer Z50 (Firmware 2.40) prinzipiell gut: Autofokus ist größtenteils flott und präzise. Wie erwartet gibt es ein paar kleinere Themen dadurch, dass das Objektiv nicht an dem Bajonett hängt, für das es entwickelt wurde, sondern an einem Adapter:
° Die Modi ∞-3m & ∞-15m funktionieren nicht. In beiden kann ich auf ca 1¼m scharfstellen.
° Der Pinpoint-Autofokus funktioniert nicht (bzw. bestenfalls 1 mal von 20) und zwar auch bei grellem Sonnenschein und offener Blende.
° Focus Peaking (das farbliche Anzeigen scharfer Kanten im Sucherbild) funktioniert nur im manuellen Fokusmodus – vorab Autofokus mit manuellem Feinfokussieren geht also nicht.
° Firmware wird sich wohl nicht so updaten lassen, wie wenn die Linse an einer Sony hängt. (Was nämlich das eine oder andere o.a. Thema erledigen könnte.)
° Wie man die Firmware des Adapters updatet, muss ich auch erst rauskriegen. (Könnte ebenfalls Punkte von oben lösen.)

An der Zfc funktioniert die Kombination Objektiv + ETZ-Adapter überhaupt nicht. Also: Gar nicht. (Kamera meldet beim Einschalten ›error‹ und blockiert komplett.)

K
Kenneth Lee

It can work with Z9 after updated the firmware. However, it can only support few Sony E-mount lenses included FE 50mm f1.4 ZA and FE 200-600mm G. The FE 35mm f1.4 cannot work! Other third party lenses like Samyang cannot work!

12

Customer Reviews

Based on 8 reviews
75%
(6)
25%
(2)
0%
(0)
0%
(0)
0%
(0)
K
Kim SG
New FW V1.9

Hi,
When I first got this adapter two days ago, it worked well on my Sony lenses and Sigma lenses but it didn't work on Samyang's and Tokina's lens.
I found today the new FW Version 1.9 which was released on 3 Aug and downloaded and upgraded the FW from the old one(V1.3?) to V1.9.
After upgrading, this adapter doesn't work on any brand lenses. I can't find the old versions of FW on this site.
What are the problems with V1.9?
Why no old versions of FW?
Is there any possibility that the adapter was damaged during upgrading?
Let me have your comments asap!

Thanks

G
Guy Booth
ETZ Review

I am using it with the Sigma e mount 100-400 mm F5-6.3 Contemporary DG DN OS on a Nikon Z 6II. All the functions appear to be working.
I like how thin it is.
The fit between the adaptor and the camera is tight. It is difficult to put the adaptor on the camera without the lens attached, but with the lens attached it is fine, so I am not complaining about that.
My concern is that there is definite movement between the adaptor and the lens. I can "rock" the lens and feel it move. It felt tight enough when I mounted the lens, but apparently it is not as tight as it should be. I don't know if it is affecting the focus.
I am unsure as to whether I should return it.

T
Theo Roelofsen
ETZ assessment

I tried it with a few lenses and it worked well eg Sigma 85mm f1.4 DG DN Art, Sigma 105mm Macro DG DN Art, Sony 14mm f1.8, Sony 24-240mm zoom. It worked intermittently with a Zeiss (Sony) 24-70 zoom - sometimes it would not focus until after several tries and sometimes it would not focus at all.
I would like to make a comment about your website - it STINKS -- its AWFUL. Very difficult to find things, no manuals and very few instructions.

M
Matthias Wolf

Mit dem Tamron 150-500 arbeitet der Adapter (Firmware 1.60) an einer Z50 (Firmware 2.40) prinzipiell gut: Autofokus ist größtenteils flott und präzise. Wie erwartet gibt es ein paar kleinere Themen dadurch, dass das Objektiv nicht an dem Bajonett hängt, für das es entwickelt wurde, sondern an einem Adapter:
° Die Modi ∞-3m & ∞-15m funktionieren nicht. In beiden kann ich auf ca 1¼m scharfstellen.
° Der Pinpoint-Autofokus funktioniert nicht (bzw. bestenfalls 1 mal von 20) und zwar auch bei grellem Sonnenschein und offener Blende.
° Focus Peaking (das farbliche Anzeigen scharfer Kanten im Sucherbild) funktioniert nur im manuellen Fokusmodus – vorab Autofokus mit manuellem Feinfokussieren geht also nicht.
° Firmware wird sich wohl nicht so updaten lassen, wie wenn die Linse an einer Sony hängt. (Was nämlich das eine oder andere o.a. Thema erledigen könnte.)
° Wie man die Firmware des Adapters updatet, muss ich auch erst rauskriegen. (Könnte ebenfalls Punkte von oben lösen.)

An der Zfc funktioniert die Kombination Objektiv + ETZ-Adapter überhaupt nicht. Also: Gar nicht. (Kamera meldet beim Einschalten ›error‹ und blockiert komplett.)

K
Kenneth Lee

It can work with Z9 after updated the firmware. However, it can only support few Sony E-mount lenses included FE 50mm f1.4 ZA and FE 200-600mm G. The FE 35mm f1.4 cannot work! Other third party lenses like Samyang cannot work!

12